BW Manufacturing SCB-1200 Shot Blaster w/Blast Head
The SCB-1200 features a removable dust containment box with wheels for ease of dumping. One handed operation controls for raising and lowering heads, speed and shot control. A state of the art blast head design allowing you quick blast wheel changes and a feathered blasting edge, which enables each successive path to overlap without excessive penetration omitting the "striping effect". The finished surface is ideal for thin-set applications or for use with clear coatings along with the power to give you an aggressive shot blast profile when needed. The SCB 1200 comes equipped with the B-1200 Blast Head. The optional accessory attachments are the SC-1200 Scarifying Head and the DG-1225 Diamond Grinding Head complete with diamonds.
After years of research, development and testing, B W Manufacturing, Inc. has produced the only mid-sized ride on shotblast/scarifying machine in the market today. The SCB-1200 gives you mobility and versatility by being able to switch back and forth between blasting, scarifying, and diamond grinding/polishing in just minutes.
The SCB-1200 features a removable dust containment box with wheels for ease of dumping. One handed operation controls for raising and lowering heads, speed and shot control. A state of the art blast head design allowing you quick blast wheel changes and a feathered blasting edge, which enables each successive path to overlap without excessive penetration omitting the "striping effect". The finished surface is ideal for thin-set applications or for use with clear coatings along with the power to give you an aggressive shot blast profile when needed.
Using the latest technology in EPA approved liquid cooled diesel engines and catalytic converter; you are far below any minimal emissions standards. With the use of state of the art components, compressors, electronic pulsation, hydraulics, and drives, the SCB-1200 is the most reliable and productive mid-sized surface preparation machine on the market today.
Production Capacity: 2000 to 3000 sfh
Cleaning Path: 12" (4" & 5" Adaptors Available)
Interchangeable Head: Shotblast
Tires: Non-marking
Length: 81"
Width: 35"
Height: 54"
Weight: 1570 lbs.
Engine (Turbo Diesel): 36 hp
Drive: Hydrostat
Compressor: 4.5 cfm
Vacuum: 1480 cfm.
Steering: Manual
Collector Capacity: 3.8 cubic ft.
Aisle Width Minimum: 54" (Blastable Width)
VIEW IN OUR STORE
Onfloor 16 Floor Grinder / Scarifier / Sander
This is Onfloor 16 Floor Grinder / Scarifier / Sander comes complete with either the Red Diamond Concrete Plates OR The Carbide Scarifier blades. It runs on 115V and has a 16" head.
ONFLOOR™ Technologies presents Onfloor 16™ — a revolutionary new tool in floor preparation. More than just a sander, Onfloor 16™ helps bring new life to concrete surfaces, decks and hardwood floors. Onfloor 16™ is powerful enough for demanding industrial jobs, yet light and simple enough for home use. And the exclusive patented design of Onfloor 16™ works to provide superior results with minimum effort. So not only will you be sanding like a pro in just a few minutes, you’ll be finished just as quickly.
With Onfloor 16™, you can remove years of wear from just about any concrete surface. Our exclusive Red Diamond Concrete Plates are embedded with a coarse diamond grit that will quickly ready your floor for any coating application. And if your concrete floor has a coating that doesn't require removal, the Red Diamond Concrete Plates will abrade the surface and remove the gloss. Plus, when fitted with the powerful Carbide Scarifier Attachments, Onfloor 16™ helps remove most coatings and hard, brittle adhesives. The Carbide Scarifier blades are available for this machine as well.
Frequently Asked Questions >>
Instructional Video For Concrete Prep >>
VIEW IN OUR STORE
BW Manufacturing DG-16 Diamond Grinder/Polisher
The DG-16 has the ability to grind within 1" of a vertical surface. The flexibility between grinding and polishing, and the virtually dust free operation when connected to BW Manufacturing's A-101 Pulse Vac makes the DG-16 an excellent addition to the surface preparation contractors line of equipment. What sets the DG-16 Diamond Grinder/Polisher apart from all the others is the design, concept, and innovation. The DG-16 has a rubber mounted non-planetary grinding head that where down pressure controlled by spring pressure. With the combination of the wheels a floating, head and specially designed diamonds, you are able to grind or polis without scaring or gouging of the concrete, even on cracks and expansion joints. With the ease of diamond cutter and polishing pad installation and removal, the contractor won't lose production due to lengthy diamond tool changeovers. This machine is a 220 Volt Electric Unit.
FEATURES / SPECIFICATIONS:
Cleaning Path: 16"
Side grind clearance to wall: 1"
Front grind clearance to wall: 6"
Wheels: 2 - 4 Inch Rigid / 2 - 4 Inch Swivel
Height: 29"
Length: 24"
Width: 18"
Weight: 210 Lbs. (Electric) / 225 Lbs. (Gas)
Motor Options: 5 HP 220 Volt single phase / 5 HP 440 Volt three phase /11HP Gas (Honda)
Seal System: Brushes
Control Handle: Fully Adjustable
VIEW IN OUR STORE
On Floor 16" Grinder Belts
These 16" belts (set of three) are the replacement belts for the Onfloor 16 Floor Grinder.
SIZE:
Kevlar Belts for 16" Machine - #494097
VIEW IN OUR STORE
On Floor 20" Grinder Belts
These 20" belts (set of three) are the replacement belts for the Onfloor 16 Floor Grinder.
SIZE:
Kevlar Belts for 20" Machine - #494070
VIEW IN OUR STORE
OnFloor Grinder Red Diamond Heads
The Onfloor Red Diamond Attachments are for new or old concrete, removes thin mil coatings, removes latents containments, and opens pores in unfinished concrete. Estimated coverage for a set of 3 attachments is 8000 sq. ft. Also used for abrading existing concrete for recoat.
SIZES:
• For 16" grinder, choose 6.5" heads, Part #492329
• For 20" grinder, choose 8" heads, Part #468509
VIEW IN OUR STORE
